OPTIONS

Individual adaptation of your Handtmann 5-axis machining centres through options

Modular machines and a large catalogue of options in different areas make it possible to customise all Handtmann machining centres. Configure your machining centre optimally for your needs.

Example options in the area of machine components:

  • HSK63A, HSK100A, HSK80F motor spindles
  • Tool magazines of different capacity and tool length
  • Minimum quantity lubrication
  • Cooling lubricant systems (external and internal cooling, temperature control)
  • Chip conveyor
  • Briquetting systems
  • Workzone extraction
  • Dust extraction systems
  • Vacuum supply for clamping devices
  • Top cover
  • Partition walls
  • Manual control panel
  • Rotating transparent window
  • and much more.
Optional spindle monitoring system and camera monitoring system on a GANTRY TS-Variant

Example options in the area of measurement, inspection and control:

  • Touch probe
  • Tool measurement and control
  • Spindle monitoring (HSMS)
  • Temperature compensation linear
  • Temperature compensation spindle
  • Linear and rotational axis measurement and adjustment
  • Camera surveillance
  • Accuracy packages
  • and much more.
Optional 3D machine model shown for a PBZ SC

Example options in the area of software:

  • Telediagnosis
  • Tool management
  • Measuring cycles
  • Machine data monitoring
  • Process data monitoring
  • 3D machine models
  • Post processors
  • Simulation models
  • and much more.

REFERENCE EXAMPLES OF OPTIONS

Optional exhaust system shown on a PBZ SC

Specially designed exhaust system for machining plastics. Enclosed workzone and efficient, explosion-protected extraction of many different types of dust such as CFRP, GRP, Ureol, rigid foam, etc.

… on a PBZ SC.

Optional hand-held control unit shown on a PBZ HD

Optional hand-held control unit for set-up and setting work on the machine.

… on a PBZ HD.

Optional additional Y-bridge system shown on a GANTRY

Two Y-bridges permit maximum flexibility in use of the machine and thus maximum application diversity. Machining of a single workpiece over its entire length or creation of two workzones for machining two workpieces.

… on a GANTRY.

Optional partition wall shown on a GANTRY

Optional partition wall to separate the machine into two workzones for loading and unloading parallel to machining. A top cover can be used to obtain a completely enclosed workzone here as well.

… on a GANTRY.

Optional special configuration twin spindle (TS) on a GANTRY TS-Variante

Two machining units permit maximum productivity and allow machining of two mirrored or identical workpieces.

... … on a GANTRY TS-Variante.

Optional tool arena shown on a GANTRY

Tool arena with any number of locations for tools of different lengths and weights. Tool handling is performed by a robot.


… on a GANTRY.

on a GANTRY TS-Variant

Located centrally in the control panel: Integrated cameras for real-time image transmission from the workzone.
Handtmann Spindle Monitoring System (=HSMS) for real-time monitoring and long-term evaluation of spindle data and cutting processes.

… on a GANTRY TS-Variant.

Optional briquetting system shown on a HBZ CompactCell

In the case of very high chip removal volumes, briquetting systems ensure efficient chip management. Reduced space requirement for storage and transport as well as higher value for resale of the pressed chips increase the efficiency of the overall concept.

… on a HBZ CompactCell.

Optional radio wave touch probe on a PBZ HD

Radio wave touch probe for set-up work on fixtures and parts as well as for measurements on finished parts.

… on a PBZ HD.

Optional spindle monitoring system and camera monitoring system on a HBZ AeroCell

Located centrally in the control panel: Integrated cameras for real-time image transmission from the workzone.
Handtmann Spindle Monitoring System (=HSMS) for real-time monitoring and long-term evaluation of spindle data and cutting processes.

… on a HBZ AeroCell.

Optional washing system shown on a PBZ HD

Integrated washing nozzles to flush chips off the part and thus facilitate part removal and clamping.

… on a PBZ HD.

Optional rack-type tool magazine on a PBZ HD

Rack magazine as example of tool magazines that can be individually configured according to specific requirements and extended as required to achieve flexible production with a small footprint.


… on a PBZ HD.

Optional rack-type tool magazine on a UBZ

Rack magazine as example of tool magazines that can be individually configured according to specific requirements and extended as required to achieve flexible production with a small footprint.

… on a UBZ.

HANDTMANN SOLUTIONS – COMPREHENSIVE SOLUTIONS FROM ONE SOURCE

Handtmann Machine Solutions as part of the comprehensive solutions of Handtmann Solutions

Machine Solutions

Four product lines for a wide range of machining requirements

Handtmann Turn-Key Solutions as part of the comprehensive solutions of Handtmann Solutions

Turn-Key Solutions

Complete and individual process support tailored to perfection

Handtmann Service Solutions as part of the comprehensive solutions of Handtmann Solutions

Service Solutions

Long-term machine availability and continuous increase in productivity

Handtmann Finance Solutions as part of the comprehensive solutions of Handtmann Solutions

Finance Solutions

Comprehensive advice and flexible finance offerings

Contact us

Handtmann A-Punkt Automation GmbH

Phone: +49 751 5079-0
E-mail: sales.apunkt@handtmann.de