GANTRY® high moving portal machining centres

Precise 5-axis machining with high moving Y-bridge

Stable vertical machining

A machine concept that permits both dynamic 5-axis simultaneous machining of large aluminium and composite workpieces as well as heavy-duty cutting and HPC aluminium machining with high torques and power? The GANTRY product line successfully achieves this with two machine series and a high level of modularisation: The GANTRY HD is the specialist for dynamic machining in composites and high speed cutting in aluminium. In contrast, the GANTRY SD features very large drives and guide rails for stable and efficient high performance machining of aluminium and heavy-duty cutting of titanium and steel. The intrinsically rigid machine design with high moving Y-bridge guarantees highly precise machining on table sizes up to 47,000 x 7,000 mm in both variants. 

Customisation

Both series of the high moving portal machining centres can be flexibly customised by means of a wide range of options and optimally adapted to your requirements. Two special configurations are particularly worth highlighting: the configuration with double portal (DP) and the configuration with two spindles (TS). 

One product line - two series

The GANTRY product line comprises two machine series with different technological highlights and sizes. This allows us to cover a wide range of applications in 5-axis cutting and to provide the optimum machine for your application.

GANTRY HD GANTRY SD
Table size Table length: 4,000 to 47,000 mm
Table width: max. 4,000 mm
Table length: 4,000 to 47,000 mm
Table width: max. 7,000 mm
Axis travel (X/Y/Z) max. 47,500/4,500/1,500 mm max. 47,500/6,700/2,200 mm
Travel speed (X/Y/Z) max. 60/60/60 m/min max. 50/50/30 m/min
Spindle data

Power: max. 81 kW
Speed: max. 30,000 rpm
Torque: max. 75 Nm

Power: max. 187 kW
Speed: max. 30,000 rpm
Torque: max. 600 Nm
5-Achs Hochportalbearbeitungszentrum GANTRY VS(HP) 5-Achs Hochportalbearbeitungszentrum GANTRY mit TS-Modul (Doppelspindel)

YOUR ADVANTAGES

  • Precise 5-axis simultaneous machining
  • Intrinsically rigid machine design with high moving Y-bridge
  • Dynamic machining in composites and high speed cutting in aluminium
  • High performance machining of aluminium as well as heavy-duty cutting of steel and titanium
  • Machining of large-volume and large workpieces 
  • Customer-specific configuration of table sizes, floor height and clamping concept
  • Special configurations possible: Double portal (DP) and twin spindle (TS)
  • Modular machine design for maximum flexibility thanks to many options

SPECIAL CONFIGURATIONS

Double portal? Twin spindle? Individually configure your GANTRY machining centre with two portals or two machining units.

GANTRY with two complete machining units as special configuration (TS)

"TS" TWIN SPINDLE

Machine two identical or two mirrored parts in one operation by choosing the "TS" variant for your GANTRY machining centre. This expansion results in two Z-axes, each with a complete machining unit comprising a milling head and spindle. 

Double your productivity with the "TS" module. 

GANTRY with two Y-bridges as special configuration (DP)

"DP" double portal

Expansion from one to two Y-bridges ensures maximum flexibility. The double-portal configuration permits separation into two workzones as well as joint machining of a part. In addition, this concept also means that you can machine a long part by moving only one of the two Y-bridges over the entire machine length.

Guarantee maximum flexibility with the "DP" module.

APPLICATIONS & HIGHLIGHTS

GANTRY DP-Variant - Two Y-bridges

Double portal as special configuration: Two Y-bridges permit separation into two workzones as well as joint machining of a part. It is also possible for only one Y-bridge to travel over the entire table length.

GANTRY DP-Variant – Moving Y-bridge

Double portal as special configuration: Two Y-bridges permit separation into two workzones as well as joint machining of a part. It is also possible for only one Y-bridge to travel over the entire table length.

GANTRY – 5-axis machining

Good accessibility to the workpiece: Rotation angle A-axis: +/- 105°, Rotation angle C-axis: +/- 200°

GANTRY – Machining table up to a length of 47,000 mm

Large-size workzone and customised table length up to 47,000 mm.

GANTRY – 5-axis machining

Good accessibility to the workpiece: Rotation angle A-axis: +/- 105°, Rotation angle C-axis: +/- 200°

GANTRY – Application example for aluminium

GANTRY application example: Aluminium bottom frame (aerospace)

GANTRY TS-Variant – Monitoring systems

Special configuration with twin spindle (TS): Control panel with spindle monitoring system (HSMS) and camera system with live transmission from cameras on both Z-axes.

GANTRY TS-Variant – Customised table size

Special configuration with twin spindle (TS): The „TS“ module extends GANTRY machines by adding a complete second machining unit. Customised configuration of the table size is also possible in this case.

GANTRY TS-Variant – Twin spindle flexibility

Special configuration with twin spindle (TS): Machining of two mirrored parts possible. Flexible and good access to the workpiece thanks to 2-axis head: Rotation angle A-axis: +/- 105°, Rotation angle C-axis: +/- 200°. Camera integrated on each Z-axis.

GANTRY TS-Variant – Twin spindle flexibility

Special configuration with twin spindle (TS): Individual control of both Z-axes possible. Machining of two mirrored parts possible. Flexible and good access to the workpiece thanks to 2-axis head: Rotation angle A-axis: +/- 105°, Rotation angle C-axis: +/- 200°. Camera integrated on each Z-axis.

GANTRY – Application example for aluminium

GANTRY application example: Aluminium bulkhead (aerospace)

GANTRY – Ergonomics

Ergonomic machine concept with optimum view into the workzone and operator-friendly design.

GANTRY – Control panel with spindle monitoring system and camera monitoring system

Ergonomic, swivelling control panel with spindle monitoring system (HSMS) and camera monitoring system

GANTRY – Double table

Automation of a GANTRY machine with double table for loading and unloading parallel to production.

GANTRY – Tool magazine

Optional tool magazine with robot system.

GANTRY – Tool magazine

Optional tool magazine with robot system.

GANTRY – Tool changing

Integrated tool magazine for fast tool changing.

HANDTMANN SOLUTIONS – COMPREHENSIVE SOLUTIONS FROM ONE SOURCE

Handtmann Machine Solutions as part of the comprehensive solutions of Handtmann Solutions

Machine Solutions

Four product lines for a wide range of machining requirements

Handtmann Turn-Key Solutions as part of the comprehensive solutions of Handtmann Solutions

Turn-Key Solutions

Complete and individual process support tailored to perfection

Handtmann Service Solutions as part of the comprehensive solutions of Handtmann Solutions

Service Solutions

Long-term machine availability and continuous increase in productivity

Handtmann Finance Solutions as part of the comprehensive solutions of Handtmann Solutions

Finance Solutions

Comprehensive advice and flexible finance offerings